SDI-Flex® 54

The FLEXIBLE SDI-Flex® 54 patented coating technology, SDI-Flex’s particle loading, results from SDI-Flex®’ s unique ability developed over years and the trial of hundreds of formulas. SDI-Flex’s particle loading is the addition of a complex series of SDI-Flex’s particles into a resin solution which causes the resin solution to out-perform its basic chemistry.

In addition to improving the chemical performance of resin systems, SDI-Flex’s particle loading significantly enhances the dynamic mechanical performance of the resin system. Total performance characteristics, both chemical and mechanical, are significantly better than liquid epoxy, fusion-bond epoxy and other high performance coating systems.

SDI-Flex® 54 SST

SDI-Flex® 54 SST is a thin-film SDI-Flex’s polymer coating that is easily applied on almost all substrates.  It can also be applied over marginally prepared substrates and rusty steel surfaces. It can be used over itself or as a primer under high performance topcoats, or as a barrier coat or universal primer. It is tolerant of moist/damp surfaces and suitable for use in USDA inspected facilities. Product is used as a maintenance coating to protect steel structures in industrial facilities, bridges, tank exteriors, marine weathering, offshore, oil tanks, piping, roofs, water towers and other exposures. It has good chemical resistance to splash/spillage, fumes and immersion in neutral, fresh and salt water.

SDI-Flex® 54 SST

SDI-Flex® 54 SST is a thin-film SDI-Flex’s polymer coating that is easily applied on almost all substrates.  It can also be applied over marginally prepared substrates and rusty steel surfaces. It can be used over itself or as a primer under high performance topcoats, or as a barrier coat or universal primer. It is tolerant of moist/damp surfaces and suitable for use in USDA inspected facilities. Product is used as a maintenance coating to protect steel structures in industrial facilities, bridges, tank exteriors, marine weathering, offshore, oil tanks, piping, roofs, water towers and other exposures. It has good chemical resistance to splash/spillage, fumes and immersion in neutral, fresh and salt water.

SDI-Flex® 426

SDI-Flex® 426 is a 100% solids, spray applied and air-dried SDI-Flex’s polymer coating engineered to provide corrosion protection in potable water service. This highly modified resin system has been loaded with a unique package of SDI-Flex’s particles to enhance performance in drinking water (potable water) environments. SDI-Flex® 426 has been Tested and Certified by WQA according to NSF/ANSI 61 section 5.

SDI-Flex® SPG

The Original SDI-Flex® SPG is a technically advanced 100% solids SDI-Flex’s polymer material that has been designed to be a high-build corrosion barrier as well as use for patching severe pitting in steel, spalling and cracks in concrete floors and walls where corrosion and chemical attack are problems. SDI-Flex® SPG may be applied in thickness of 15 mils (375 microns) to 3/4“ (750 mils, 19 mm) thick.

SDI-Flex® SPG is ideal for high abrasion, erosion, and corrosion environments in both critical and non-critical areas. Specially formulated to repair pitted metal and concrete, SDI-Flex® SPG also works extremely well on new construction applications with outstanding adhesion to virtually all substrates, including fiberglass and aluminum. SDI-Flex® SPG provides excellent corrosion resistance to a wide variety of environments.

SDI-Flex® SPG reduces labor costs through its quick application versus other high build products. Designed as a one-coat application, SDI-Flex® SPG may be used as a stand-alone system or in conjunction with other SDI-Flex® coating materials. SDI-Flex® SPG is available in grey.

Pontoon Deck Preservation for Floating Dry Dock – Marine News (April 2016 issue

SDI-Flex® TZM   

SDI-Flex® TZM is a thin-film, spray applied and air-cured SDI-Flex’s polymer coating engineered to provide excellent abrasion and corrosion protection in critical service environments for all metals, fiberglass reinforced plastics, composites and plastic substrates. Product is a highly modified resin system that has been heavily loaded with a unique package of SDI-Flex’s particles to enhance performance in extremely aggressive environments. The product contains no lead, chrome or isocyanates and bears a VOC rating of 1.63 lbs/gal or 198 g/l, well under EPA requirements which makes it a very attractive alternative for aerospace, military and marine applications. The technical data provided is standard for routine military/aviation applications

SDI-Flex® 54 (LMA-MR005A Form 1 Spec)   

SDI-Flex® 54 (LMA-MR005A) is a thin-film, spray applied and air-cured SDI-Flex’s coating engineered to provide excellent abrasion and corrosion protection in critical service environments for all metals, fiberglass reinforced plastics, composites and plastic substrates. Product is a highly modified resin system that has been heavily loaded with a unique package of SDI-Flex’s particles to enhance performance in extremely aggressive environments. The product contains no lead, chrome or isocyanates and bears a VOC rating of 1.63 lbs/gal or 198 g/l, well under EPA requirements which makes it a very attractive e alternative for aerospace, military and marine applications. The technical data provided is standard for routine military/aviation applications.

SDI-Flex® 54 SF

SDI-Flex® 54 SF is 100% solids thick-film, spray applied and air-dried SDI-Flex’s coating engineered to provide excellent abrasion and corrosion protection in various environments for all metals, fiberglass reinforced plastics, concrete and plastic substrates.  Color of product is gray.

 

 

 

SDI-Flex® SPG 22

SDI-Flex® SPG 22 is a 100% SDI-Flex’s polymer coating that specializes in providing outstanding chemical protection to a wide variety of metal, fiberglass, reinforced plastic, concrete substrates in aggressive environments.  This product has higher chemical resistance than normal SPG

SDI-Flex® PCF  

SDI-Flex® PCF is a thin-film, spray applied SDI-Flex’s polymer coating engineered to provide excellent chemical resistance and corrosion protection to the Internal Surfaces (I.D.) of Oil Country Tubular Goods. SDI-Flex® PCF is a highly modified resin system that has been heavily loaded with a unique package of SDI-Flex’s particles enhancing its ability to perform well in a variety of aggressive environments. The formula is highly cross-linked to provide chemical resistance. It has performed very well for over 15-years both domestically and internationally (i.e. Texas, China, and Argentina).